Siemens SIMATIC ET 200eco PN - Page 124

I/O device digital inputs/digital outputs
9.2 I/O device digital outputs
ET 200eco PN
124 Operating Instructions, 08/2016, A5E01250250-AJ
Technical data of the 8 DO DC 24V/1,3A 4×M12 I/O device
Technical data
Dimensions and weight
Dimensions W x H x D (mm) 30 x 200 x 49
Weight
Approx. 550 g
Module-specific data
Transmission rate
100 Mbps full duplex
Transmission mode
100BASE-TX
Autonegotiation
Yes
Bus protocol PROFINET IO
• IRT with the option "high flexibility"
• IRT with the option "high performance"
Supported Ethernet services PROFINET IO (Device)
• ping
• arp
• LLDP
• Network diagnostics (SNMP)
• DCP
• Prioritized startup
• Media redundancy
PROFINET interface
• Connection socket
2 x M12 d-coded
• Switch function
Yes, internal
• Auto-crossover
Yes, if autonegotiation is enabled
Manufacturer ID (Vendor ID)
002A
H
Device ID (DeviceID)
0306
H
Voltages and currents
Supply voltage 1L+
DC 24 V
• Reverse polarity protection
Yes, against destruction, loads are activated
• Infeed current 1L+
Max. 4 A
Supply voltage 2L+
DC 24 V
• Reverse polarity protection
Yes, against destruction, loads are activated
• Infeed current 2L+
Max. 4 A
Total current of the outputs *
• All mounting positions to 55°C
3.9 A per 1L+ and 2L+
• All mounting positions to 60°C
2.6 A per 1L+ and 2L+
Current consumption
From supply voltage (1L+)
Typ. 100 mA
Power loss of the device
Typ. 5.5 W