Siemens SIMATIC ET 200eco PN - Page 158

I/O device analog input/analog output
10.1 I/O device analog input
ET 200eco PN
158 Operating Instructions, 08/2016, A5E01250250-AJ
Technical data
Technical data
Dimensions and weight
Dimensions W x H x D (mm) 60 x 175 x 49
Weight
Approx. 930 g
Module-specific data
Transmission rate
100 Mbps full duplex
Transmission mode
100BASE-TX
Autonegotiation
Yes
Bus protocol PROFINET IO
• IRT with the option "high flexibility"
• IRT with the option "high performance"
Supported Ethernet services PROFINET IO (Device)
• ping
• arp
• LLDP
• Network diagnostics (SNMP)
• DCP
• Prioritized startup
• Media redundancy
PROFINET interface
• Connection socket
2 x M12 d-coded
• Switch function
Yes, internal
• Auto-crossover
Yes; if autonegotiation is enabled
Manufacturer ID (Vendor ID)
002A
H
Device ID (DeviceID)
0306
H
Voltages and currents
Supply voltage 1L+
DC 24 V
Reverse polarity protection
Yes; against destruction
• Infeed current 1L+
Max. 4 A
Supply voltage 2L+
DC 24 V
• Infeed current 2L+
Max. 4 A
Current consumption
• From supply voltage 1L+
Typ. 110 mA
• From supply voltage 2L+
0 mA
Power loss of the device
Typ. 2.8 W, without sensor current
Analog inputs
Number of inputs
8 (4 for U or I, 4 for RTD or thermocouple)
Cable length, shielded
Max. 30 m