Siemens SIMATIC ET 200eco PN - Page 173

I/O device analog input/analog output
10.1 I/O device analog input
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
173
Parameters for analog input 8 AI RTD/TC 8xM12 (6ES7144-6KD50-0AB0)
Parameters
Range of values
Default setting
Range of effectiveness
Group diagnostics
• Disable
• Enable
Disable Device
Diagnostics, missing 1L+
• Disable
• Enable
Disable Device
Interference frequency sup-
pression
• OFF
• 60 Hz
• 50 Hz
• 10 Hz
50 Hz Device
Temperature unit
• Celsius
• Fahrenheit
• Kelvin
Celsius Device
Reference temperature for TC
• -145.0 to 155.0 (Celsius)
• -229.0 to 311.0 (Fahrenheit)
• 128.2 to 428.2 (Kelvin)
0.0 Device
Measurement type, channels
0 to 7
• Disabled
• Voltage +/-80 mV
• Resistance (4-wire connection)
• Resistance (3-wire connection)
• Resistance (2-wire connection)
• Thermoresistor
(linear, 4-conductor connection)
• Thermoresistor
(linear, 3-conductor connection)
• Thermoresistor
(linear, 2-conductor connection)
• Thermocouple elements
Thermoresistor Pt100
(4-conductor connec-
tion)
Channel