Article numbers
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
237
SIMATIC NET, IE Connecting Cable M12-180/M12-180,
preassembled IE FC Trailing Cable GP, with 2 x M12
connectors (D-coded)
Bus line for PROFINET, converted on both sides, 4-wire,
shielded, converted with 2 x M12 D coded, angled
Bus line for PROFINET, converted on one side, 4-wire,
shielded, converted with 1 x M12 D coded
AS interface accessory M12 sealing cap for IP67 modules
Accessory for the interface "M12-socket X1 to X4/X8
M12 jack, 5-pin, can be pre-assembled, max. 0.75 mm
2
, screw termi-
nals, type M, NO+NC
Angle M12 jack, 5-pin, can be pre-assembled, max. 0.75 mm
2
terminals, type M, IP67, NO+NC
M12 jack, 4-pin, can be assembled, max. 0.75 mm
2
, screw terminals,
type L, IP67, NO+NC
M12 plug-in cables, shielded, for connecting digital and analog sensors
and actuators
Connecting cable M12-M12, 3-pin, PUR cable, 3 × 0.34
mm
2
, type E, L, IP67, NO, straight female connector M12
to straight male connector M12
Connecting cable M12-M12, 4-pin, PUR cable, 4 × 0.34
mm
2
, type F, L, IP67, NO+NC, straight female connector
M12 to straight male connector M12
Angled cable connector M12, 4-pin, 5M PUR line, 4 x 0.34
mm
2
, type L, IP 67, NO+NC
Angled cable connector M12, 5-pin, PUR line, 5 x 0.34
mm
2
, type G, IP67, NO+NC
Compensation connector M12 with integrated PT1000 for reference
junction compensation when connecting thermocouples
SIMATIC DP, Y cable for distributed I/O for double connection of I/O by
means of a single cable, 5-pin M12, 200 mm
To Next Page
Loading...
