Siemens SIMATIC ET 200eco PN - Page 46

Wiring
3.6 Pin assignment of connectors
ET 200eco PN
46 Operating Instructions, 08/2016, A5E01250250-AJ
I/O device 8 DO DC 24V/1,3A 8×M12 (6ES7142-6BG00-0AB0) and 8 DO DC 24V/2,0A 8×M12
(6ES7142-6BR00-0AB0)
The table below shows the pin assignments for I/O devices 8 DO DC 24V/1,3A 8×M12 and
8 DO DC 24V/2,0A 8×M12.
Table 3- 9 Pin assignment of the M12 cable connector for I/O device 8 DO DC 24V/1,3A 8×M12 and
8 DO DC 24V/2,0A 8×M12
Pin
Assignment
View of the cable connector (wiring side)
Assignment X1 to X4 (1L+ non-switched)
2 Not used
3
Supply ground 1M
4 Output signal DQ
0
: Connector X1
Output signal DQ
1
: Connector X2
Output signal DQ
2
: Connector X3
Output signal DQ
3
: Connector X4
5
Functional earth FE
Assignment X5 to X8 (2L+ switched)
1
Not used
2
Not used
3
Supply ground 2M
4 Output signal DQ
4
: Connector X5
Output signal DQ
5
: Connector X6
Output signal DQ
6
: Connector X7
Output signal DQ
7
: Connector X8
5 Functional earth FE