Siemens SIMATIC ET 200eco PN - Page 97

Interrupt, error, and system messages
7.5 Diagnostics with STEP 7
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
97
The IO-Link master generates channel diagnostics for each port. The port-specific channel
diagnostics are display in the port diagnostics (CET 0x9502
H
).
The following table provides an overview of the possible diagnostics events and their
meaning.
Table 7- 11 Overview Error types IO-Link Port Diagnostics
Error type
(CET)
Expanded error
type (ECET)
Error text
Meaning
0x9502
H
(38136
D
)
0x1883
H
(6275
D
)
S7-PCT configuration
errors
Wrong or inconsistent parameter assignment
0x1888
H
(6280
D
)
Module defective
Replace module
0x7F22
H
(32546
D
)
Device not available
Communication aborted
0x1801
H
(6145
D
)
Parameter assignment
error during startup
Check the parameterization
0x1802
H
(6146
D
)
Wrong device
Check device
0x1803
H
(6147
D
)
Nonconformance of pro-
cess data
Check submodule configuration
0x1804
H
(6148
D
)
Short circuit at C/Q
Check port connection
0x1805
H
(6149
D
)
IO-Link PHY overtempera-
ture
0x1806
H
(6150
D
)
Short circuit at L+
Check port connection
0x1807
H
(6151
D
)
Undervoltage at L+
Check port connection
0x1808
H
(6152
D
)
Event overflow at device
0x1809
H
(6153
D
)
Backup failed
Memory outside of the area 2k
0x180A
H
(6154
D
)
Backup inconsistent
Data storage index not available
0x180B
H
(6155
D
)
Backup invalid
Length of the data storage index is invalid
0x7F23
H
(32547
D
)
Backup invalid Nonconformance in identification of data storage
0x7F25
H
(32549
D
)
Backup invalid
Access to data storage denied
0x180E
H
(6158
D
)
No P24 (Class B) or un-
dervoltage
Check power supply (for example, 2L+)
0x180F
H
(6159
D
)
Short circuit at P24 (Class
B)
Check port connection
0x6000
H
(24576
D
)
Invalid cycle time
Check cycle time
0x6001
H
(24577
D
)
Revision error
Incomplete protocol version
0x6002
H
(24578
D
)
Implausible device