Technical data
10.1 Standards and approvals
CPU 1515SP PC (F)
102 Manual, 05/2017, A5E32701806-AC
WARNING
Explosion hazard
If you replace components, compliance with Class I, DIV. 2 can become invalid.
WARNING
Area of application
This device is only suitable for use in Class I, Div. 2, Group A, B, C, D, or in non-hazardous
areas.
CE marking
The CPU 1515SP PC (F) meets the requirements and protection targets of the following EC
guidelines and complies with the harmonized European standards (EN) for programmable
logic controllers published in the official gazettes of the European Community:
● 2006/95/EC "Electrical equipment designed for use within certain voltage limits" (Low-
Voltage Directive)
● 2004/108/EC "Electromagnetic Compatibility" (EMC Directive)
● 94/9/EC "Equipment and protective systems intended for use in potentially explosive
atmospheres" (Explosion Protection Directive)
The EC declarations of conformity are available for the responsible authorities at:
Siemens AG
Digital Factory
Factory Automation
DF FA AS DH AMB
Postfach 1963
D-92209 Amberg
These are also available for download on the Customer Support Internet pages, keyword
"Declaration of Conformity".
cULus approval
Underwriters Laboratories Inc., complying with
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
O
R
To Next Page
Loading...
Need help?
General
