Siemens SIMATIC ET 200SP - 10 Technical Data; Standards and Approvals

CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
101
Technical data
10
10.1 Standards and approvals
Introduction
The general technical specifications cover the following:
● The standards and test values which the CPU 1515SP PC (F) complies with and fulfils.
● The test criteria according to which the CPU 1515SP PC (F) was tested.
Currently valid markings and approvals
N
ote
The currently valid markings and approvals are printed on
the CPU 1515SP PC (F).
Safety information
WARNING
Risk of personal injury and damage to property.
In potentially explosive atmospheres, injury to persons and material damage may occur if
you disconnect plug-in connections during operation of an ET 200SP.
Always switch off the power to the ET 200SP when disconnecting plug-in connections in
potentially explosive atmospheres.
WARNING
Flying sparks due to loose cables
Risk of explosion in hazardous areas.
USB cables and PROFINET connectors may detach from the device in the case of strong
oscillation and high vibrating loads.
Attach these cables to the strain relief of the device using cable ties.