Siemens SIMATIC ET 200SP - Electromagnetic Compatibility

Technical data
10.2 Electromagnetic compatibility
CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
105
Use in industrial environments
SIMATIC products are designed for use in industry.
Table 10- 1 Use in industrial environments
Area of applica-
tion
Interference emission requirements
Interference immunity requirements
Industry
EN 61000-6-4: 2011
EN 61000-6-2: 2005
Use in residential areas
Note
The ET
200SP is intended for use in industrial areas; use in residential areas may have an
impact on radio/TV reception.
If you want to use the ET 200SP in residential areas, you must ensure that its radio
frequency interference emission complies with limit class B in accordance with EN 55011.
Suitable measures for achieving RF interference level Class B include, for example:
● Installation of the CPU 1515SP PC (F). in grounded control/switch cabinets
● Use of filters in the supply lines
Reference
The certificates for the markings and approvals can be found on the Internet under
Service&Support (http://www.siemens.com/automation/service&support).
10.2
Electromagnetic compatibility
Definition
Electromagnetic compatibility (EMC) is the ability of an electrical installation to function
satisfactorily in its electromagnetic environment without interfering with that environment.
Among other things, CPU 1515SP PC (F) also meets the requirements of the EMC
legislation for the European single market. The prerequisite for this is that the
CPU 1515SP PC (F) complies with the requirements and guidelines relating to electrical
equipment.
EMC according to NE 21
The CPU 1515SP PC does not meet the EMC specifications of the NAMUR guideline NE21.
The CPU 1515SP PC meets the EMC specifications according to IEC 61131-2 and
IEC 61000-6-2.