Siemens SIMATIC ET 200SP User Manual

Functions
8.5 Protective functions for data carriers
CPU 1515SP PC (F)
82 Manual, 05/2017, A5E32701806-AC
8.5.2
File-Based Write Filter (FBWF)
Purpose and function
The FBWF allows you to write-protect specific files and folders of a partition.
FBWF is enabled by default on the CPU 1515SP PC (F).
The FBWF is activated by means of the Windows console application fbwfmgr.exe.
NOTICE
Data loss
If both write filters are activated, the EWF blocks direct write access of the FBWF.
Data get lost after a restart of CPU 1515SP PC (F).
Activate
only one
of the two write filters.
Console application fbwfmgr.exe
The application is called via the Windows command line (Command Prompt).
The following functions, among others, are available for setting, switching on and switching
off the FBWF:
Table 8- 3 File-Based Write Filter
Function
Command
Show FBWF status
fbwfmgr /displayconfig
Activate FBWF after the next restart
fbwfmgr /enable
Write to protected files
fbwfmgr /commit c: \<Path>\<File Name>
Display help
fbwfmgr /?
Defining exclusions:
• Add file
fbwfmgr /addexclusion c:
\<Path>\<FileName.ext>
• Add folder
fbwfmgr /addexclusion c: \<Path>
• Remove file
fbwfmgr /removeexclusion c:
\<Path>\<FileName.ext>
• Remove folder
fbwfmgr /removeexclusion c: \<Path>
Note
Note:
•
The correct notation is as follows:
Drive letter: space character "\" relative file path
•
The write protection commands become effective only after a restart.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C