Siemens SIMATIC ET 200SP - Module Data; CPU 1515 SP PC, System Version WES7 E 32 Bit 4 GB RAM

Technical data
10.7 Module data
CPU 1515SP PC (F)
112 Manual, 05/2017, A5E32701806-AC
10.7
Module data
10.7.1
CPU 1515SP PC, system version WES7 E 32Bit 4GB RAM
CPU 1515SP PC, system version WES7 E 32Bit 4GB RAM
6ES7677-2AA31-0EB0
General information
Product type designation
CPU 1515SP PC
HW release number
FS06
Firmware version
V2.1
Engineering with
STEP 7 TIA Portal can be configured/integrated as of version
V14 SP1
PC configuration
Processor
Dual-Core 1 GHz, AMD G Series APU T40E
Main memory
4 GB RAM
Flash disk
30 GB
Operating systems
Windows Embedded Standard 7 E 32 bit
Installed SW
Visualization
No
Controller
S7-1500 Software Controller CPU 1505SP V2.1
Operator controls
Mode selector
1
Supply voltage
Type of supply voltage
24 V DC
Low limit of permitted range (DC)
19.2 V
High limit of permitted range (DC)
28.8 V
Reverse p
olarity protection Yes
Power and voltage failure backup
Power/voltage failure backup time
5 ms
Input current
Current consumption (rated value)
1.5 A; full processor load, incl. ET 200SP modules and USB
use
Current consumption (in no-load operation), typ.
0.6 A
Inrush current, max.
4.7 A; rated value
Power
Power consumption, max.
36 W; incl. ET 200SP modules and USB use
Incoming power to the backplane bus
8.75 W
Power loss
Power loss, typ.
15 W; without ET 200SP modules and without USB use