Siemens SIMATIC ET 200SP User Manual

Functions
8.3 BIOS description
CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
73
8.3.3.7 Exit menu
S
ettings in the Exit menu
Figure 8-9 Exit menu
The setup program is always terminated via the Exit menu.
The menu is used to save or discard the changes made.
Entry
Meaning
Exit Saving Changes Saves all changes and then starts the system with the new parame-
ters.
Save Change Without Exit
Saves all changes
Exit Discarding Changes Discards all changes and then restarts the system with the old pa-
rameters.
Load Optimal Defaults
Loads the optimum default values
Load Custom Defaults
Loads the default values
Safe Custom Defaults
Saves the default values
Discard Changes
Discards all changes

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C