CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
15
WARNING
Life-endangering voltage when control cabinet is open
If the device is installed in a control cabinet, areas or components can be under life-
endangering voltage when the control cabinet is open.
Contact with these areas or components may lead to death through electric shock.
Switch off the power before opening the control cabinet.
If the device is operated in a machine in accordance with the machinery directive, the
provisions of the guideline 2006/42/EC apply.
Safe operation of a plant
WARNING
Risk of fire
The device is classified for use in the area of Industrial Control Equipment as "Open Type"
according to UL508. If overheating occurs, burning material may leak and cause a fire.
For this reason, observe the following information:
• For approval and operation in accordance with UL508, the device must be installed in a
housing complying with UL508.
• Install the device in an enclosure that meets the requirements of sections 4.6 and 4.7.3
of the standards EN 60950-1:2006 and IEC/UL/EN/DIN-EN 60950-1.
If you have questions about the validity of installation in the planned environment, please
contact our service representatives.
N
OTICE
Protective measures
To ensure safe operation of a plant, you have to take suitable IT security measures, for
example, network segmentation.
Seal the cover with lead to protect the CFast card with the operating system of the
CPU 1515SP PC (F) against unauthorized access.
For more information on Industrial Security, refer to the Internet
(http://www.siemens.com/industrialsecurity).
To Next Page
Loading...
Need help?
General
