Siemens SIMATIC ET 200SP - Preface

CPU 1515SP PC (F)
4 Manual, 05/2017, A5E32701806-AC
Preface
Purpose of the documentation
This manual supplements the system manual for the ET 200SP distributed I/O system.
Functions that generally relate to the system are described in this manual.
The information contained in this product manual and the system / function manuals enable
you put the CPU 1515SP PC (F) into operation.
Basic knowledge required
The system must be operated and used by qualified staff only.
The following knowledge is required:
● Installation guideline for SIMATIC ET 200SP
● Programming with STEP 7
● PC based automation with an S7-1500 software controller and with
WinCC Runtime Advanced
● Basic knowledge of PC technology
● Windows Embedded Standard 7 operating system
Scope of validity of the documentation
This documentation is valid for the following devices:
ET 200SP Open Controller
Article number
System version
WES7 E 32Bit 4GB RAM
System version
WES7 P 64Bit 4GB RAM
CPU 1515SP PC
6ES7677-2AA31-0EB0
6ES7677-2AA41-0FB0
CPU 1515SP PC + HMI 128PT
--
6ES7677-2AA41-0FK0
CPU 1515SP PC + HMI 512PT
--
6ES7677-2AA41-0FL0
CPU 1515SP PC + HMI 2048PT
--
6ES7677-2AA41-0FM0
CPU 1515SP PC F
6ES7677-2FA31-0EB0
6ES7677-2FA41-0FB0
CPU 1515SP PC F + HMI 128PT
--
6ES7677-2FA41-0FK0
CPU 1515SP PC F + HMI 512PT
--
6ES7677-2FA41-0FL0
CPU 1515SP PC F + HMI 2048PT
--
6ES7677-2FA41-0FM0
CPU 1515SP PC,
spare part, without CFast card, without soft-
ware
6ES7677-2AA40-0AA0