Siemens SIMATIC ET 200SP User Manual

Maintenance
9.2 Change partitioning
CPU 1515SP PC (F)
86 Manual, 05/2017, A5E32701806-AC
9.2.2
Change partitioning
If the capacities of the partitions are insufficient, you have the option with Windows 7 to
change the size of the partitions (for example, drive C: extend and drive D: reduce).
Free space must be available in order to extend the partition. You can recognize free space
by the designation "Unallocated". You may have the reduce or delete other partitions to
create space.
Note
Deleting partitions
When partitions ar
e deleted on the data on them are destroyed.
Possible reasons for an expansion of the partition size to drive C:
● Loading security updates for Windows drive C:
● Option of installing large software packages on C, if their size exceeds the available
storage space.
Expand/shrink partition
To expand, for example, Partition C: at the cost of Partition D: follow these steps:
In the Windows start bar, select
Start > Control Panel > System and Security >
Administrative Tools > Computer Management > Disk Management
. The
"Computer
Management" window opens.
Figure 9-1 Computer Management

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C