Siemens SIMATIC ET 200SP User Manual

Maintenance
9.2 Change partitioning
CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
85
9.2
Change partitioning
9.2.1
Partitions in the delivery state
Partitioning the CFast card
The following partitions are set up on the CFast card by default:
Partition
Name
30 GB CFast card
(WES7 E 32Bit/WES7 P 64Bit)
File system
C:
SYSTEM
19.5 GB
NTFS
D: DATA 8 GB NTFS
-
-
0.4 GB
RAW
-
WinCCMB
0.04 GB
NTFS
Note
Partitions in Windows Embedded Standard 7
The partitions need to be set again if they are faulty or if the partitioning is to be changed.
NOTICE
CPU volume for software controller (0.4 GB RAW)
Do not change the CPU volume for software controllers.
This is the only way to ensure that the software controller continues to operate without
error.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C