Siemens SIMATIC ET 200SP User Manual

CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
59
Functions
8
8.1
Monitoring functions
Introduction
CPU 1515SP PC (F) has monitoring functions that you can use with the corresponding
software. The following display, monitoring and control functions are available.
● Temperature monitoring
● Monitoring of drives with SMART functionality
● Operating hours counter (information on the total runtime)
SIMATIC IPC DiagBase
The SIMATIC IPC DiagBase software is contained in the scope of delivery of the
CPU 1515SP PC (F).
With the SIMATIC IPC DiagBase software, you use the functions for local monitoring. Use
the DiagBase Management Explorer application to obtain a clearer overview for monitoring.
The DiagBase Alarm Manager notifies you of individual alarms.
Note
For additional information, refer to the online help for the SIM
ATIC IPC DiagBase software.
SIMATIC IPC DiagMonitor
The SIMATIC IPC DiagMonitor software is provided on a CD.
Potential system failures are detected and reported in good time with the diagnostics and
alerting software. The software is also used for remote diagnostics.
The software contains:
● The software for the stations to be monitored
● A library for creating your own applications

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C