CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
49
7.1 Notes on commissioning
WARNING
Improper commissioning in hazardous areas
Device failure or risk of explosion in hazardous areas.
• Do not commission the device unless it is fully mounted and connected according to the
specifications in the section Enhanced Write Filter (EWF) (Page 78).
• Before commissioning, please consider the effects on other devices in the plant.
CAUTION
Hot surfaces
Risk of burns due to hot surfaces.
During operation, only touch the device with appropriate protective gloves.
N
OTICE
Condensation in the device
Damage to the device due to condensation if the temperature between transport or storage
and the installation site differs by more than 20 °C (36 °F).
Before commissioning the device, leave it to stand for several hours in the new
environment.
N
OTICE
Data loss
Data loss may occur if write filters are used incorrectly.
Therefore, note the information on write filters.
Two write filters are available for configuration under Windows Embedded:
• Enhanced Write Filter (Page 78)
• File Based Write Filter (Page 82)
To Next Page
Loading...
