Siemens SIMATIC ET 200SP User Manual

Functions
8.5 Protective functions for data carriers
CPU 1515SP PC (F)
Manual, 05/2017, A5E32701806-AC
83
Rule for exclusion list
The following sequence applies if you define exclusions for files and folders that do not yet
exist:
● Defining exclusions
● Restart CPU 1515SP PC (F)
● Create file/folder
Display of the partition size with activated FBWF
The partition size displayed in the Explorer does not correspond with the actual size when
the FBWF is active. The size displayed is derived from the amount of memory occupied on
the partition and from memory released by the FBWF. After the maximum size of the overlay
was reached, a message is output warning of insufficient space on the partition.
Reference
Additional information on FBWF is available on the Internet (http://msdn.microsoft.com/en-
us/library/ff794219(v=winembedded.60).aspx).
Additional information on the topic of partitions is available in the Change partitioning
(Page 85) chapter.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C