Technical data
10.1 Standards and approvals
CPU 1515SP PC (F)
104 Manual, 05/2017, A5E32701806-AC
According to IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type
of protection "n") and IEC 60079-0 (Explosive atmospheres - Part 0: Equipment - General
requirements)
Marking for Australia and New Zealand
The ET 200SP distributed I/O system meets the requirements of the standard
AS/NZS CISPR 16.
Korea Certificate KCC-REM-S49-ET200SP
Note that this device corresponds to limit class A in terms of the emission of radio frequency
interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
The CPU 1515SP PC (F) with the S7-1500 software controller CPU 1505SP (F) meets the
requirements and criteria of the standard IEC 61131-2 (programmable logic controllers, part
2: Equipment requirements and tests).
The ET 200SP distributed I/O system is based on the standard IEC 61158 Type 10.
The ET 200SP distributed I/O system is based on the standard IEC 61158 Type 3.
The ET 200SP distributed I/O system is based on the standard IEC 61131-9.
To Next Page
Loading...
