Siemens SIMATIC ET 200SP User Manual

Glossary
CPU 1515SP PC (F)
140 Manual, 05/2017, A5E32701806-AC
S.M.A.R.T
Self-Monitoring, Analysis and Reporting Technology (SMART or S.M.A.R.T.) is an industry
standard for storage media. It provides for permanent monitoring of relevant parameters and
thus early recognition of pending defects.
SATA
Serial ATA. An interface for hard disk drives and optical drives with serial data transfer.
SETUP (BIOS setup)
A program used to determine information on the device configuration. The device
configuration of the CPU 1515SP PC (F) is pre-set. Changes must be made whenever a
memory expansion, new modules or drives are to be activated.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C