Siemens SIMATIC ET 200SP User Manual

Product overview
3.2 Properties
CPU 1515SP PC (F)
20 Manual, 05/2017, A5E32701806-AC
Properties
CPU 1515SP PC (F) is a PC based automation device in the design of the ET 200SP. It is
used for control and visualization purposes. The supplied IPC DiagBase software provides
basic diagnostics functions and supports you in handling the BIOS.
CPU 1515SP PC (F) has the following technical properties:
● A removable CFast card with the following pre-installations is used as storage medium:
– Windows Embedded Standard 7 operating system
– S7-1500 Software Controller CPU 1505SP (F)
– Optionally with HMI: WinCC Runtime Advanced as of V14 SP1
● Interfaces
– An interface for the exchangeable ET 200SP BusAdapters for connection of
PROFINET IO (2 ports)
– An interface for connecting devices using Industrial Ethernet (Gigabit Ethernet)
– 3 interfaces for USB devices
– One DVI-I interface for a monitor
– A sealable slot for the CFast card
– A slot for an SD/MMC card as additional optional drive
● Supply voltage 1L+ 24 V DC (SELV/PELV). The connection plug is included in the scope
of delivery.
● CPU 1515SP PC (F) is designed for use in industrial environment:
– Compact design
– Fan-less operation
– High robustness
● The CPU 1515SP PC (F) is approved for the degree of protection IP20 and for the
installation in a control cabinet.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C