Siemens SIMATIC ET 200SP User Manual

Commissioning
7.4 Installing license keys
CPU 1515SP PC (F)
56 Manual, 05/2017, A5E32701806-AC
Saving and securing license keys in the case of restore and repair
Note
Loss of license keys
A SIMATIC license key cannot be copied or duplicated. If you drag the license keys from
your USB
-Stick to your CPU 1515SP PC (F), no copies are then left on the USB stick.
Secure your purchased license keys before
restoring the delivery state (Restore) or in the
case of repair. To do this, move the license keys to a USB stick and keep this stick in a safe
place.
If a fault occurs with your license keys on the CPU 1515SP PC (F), contact your local
Siemens representative. Make sure to have the "Certificate of License" (CoL) to hand.
Note
The
EWF (Page 78) write filter serves to protect your license keys and your configuration.
Reference
For additional information on licenses, refer to the Automation License Manager manual.
You can find the manual for the CPU 1515SP PC (F) under
Start > All Programs > Siemens
Automation > Documentation
and in the Internet
(http://support.automation.siemens.com/WW/view/en/56956174).

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C