Siemens SIMATIC ET 200SP User Manual

Maintenance
9.4 Restoring delivery state using USB stick
CPU 1515SP PC (F)
96 Manual, 05/2017, A5E32701806-AC
Restoring delivery state using USB stick
Before the restore
1. Switch off the power supply of the CPU.
2. Remove all USB devices from the CPU.
3. Connect the Restore USB stick directly to the CPU.
4. Switch on the power supply of the CPU.
The CPU is started.
The restore process starts.
5. Press <F12> to start the Boot Manager.
6. Select the list entry for the USB stick as boot medium in the Boot Manager.
7. After the prompt, confirm the start by pressing any key.
The loading process is displayed (Windows logo).
The SIMATIC Restore menu opens.
8. Select a language.
9. Select "CPU 1515SP PC (F)" or "CPU 1515SP PC (F) + HMI".
10.Select the option "Restore delivery state".
The original software is restored.
After the restore
1. Exit the Restore menu.
2. Remove all USB devices.
3. Proceed as described in Initial commissioning.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C