Operator control and monitoring
9.2 Working with the user interface
SIMATIC MV420 / SIMATIC MV440
208 Operating Instructions, 04/2013, A5E02371045-06
For calibrated verification
Changing a parameter on this page or changing the lamp connected makes calibration of the
reader invalid. Calibration must be repeated and saved codes must be saved again.
Note
Detailed description of parameters in the online help
For a detailed description of the parameters and possible values, refer to the online help.
Security
In this tab, the administrator specifies which user role is permitted to execute which tasks
and, when necessary, changes the administrator password or the passwords of the users.
Note
Only an administrator can change authorizations
The permissions can only be changed by the administrator.
Figure 9-34 Options - "Security" tab
To Next Page
Loading...
