Siemens SIMATIC NET Manual&Nbsp;

3 Getting Started “PG Operation”
45
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
How to Configure for HMI Operation
2.1 Select the access point in the “Access Point of the Application” list box. The current assignment
then appears at the bottom in the list box “Interface Parameter Assignment Used”.
2.2 If the suitable access point for your application is not present, click the “Select” button in the
“Add/Remove” field.
This opens the dialog in which you can add new access points. Example:

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols