Instructions
9.2 PID_3Step
PID control
Function Manual, 03/2017, A5E35300227-AC
341
Description PID_3Step V1
Description
You use the PID_3Step instruction to configure a PID controller with self tuning for valves or
actuators with integrating behavior.
The following operating modes are possible:
● Inactive
● Pretuning
● Fine tuning
● Automatic mode
● Manual mode
● Approach substitute output value
● Transition time measurement
● Approach substitute output value with error monitoring
● Error monitoring
For a more detailed description of the operating modes, see the State parameter.
To Next Page
Loading...
Need help?
General
