Instructions
9.2 PID_3Step
PID control
306 Function Manual, 03/2017, A5E35300227-AC
Description of PID_3Step V2
Description
You use the PID_3Step instruction to configure a PID controller with self tuning for valves or
actuators with integrating behavior.
The following operating modes are possible:
● Inactive
● Pretuning
● Fine tuning
● Automatic mode
● Manual mode
● Approach substitute output value
● Transition time measurement
● Error monitoring
● Approach substitute output value with error monitoring
● Manual mode without endstop signals
For a more detailed description of the operating modes, see the State parameter.
To Next Page
Loading...
Need help?
General
