Configuring a software controller
3.10 Parameter view
PID control
54 Function Manual, 03/2017, A5E35300227-AC
Opening the parameter view
Requirement
The technology object has been added in the project tree, i.e., the associated instance DB /
technology DB of the instruction has been created.
1. Open the "Technology objects" folder in the project tree.
2. Open the technology object in the project tree.
3. Double-click the "Configuration" object.
4. Select the "Parameter view" tab in the top right corner.
The Parameter view opens. Each displayed parameter is represented by one row in the
parameter table.
The displayable parameter properties (table columns) vary depending on whether you are
working with the Parameter view in offline or online mode.
In addition, you can selectively display and hide individual table columns.
Default setting of the parameter view (Page 55)
To Next Page
Loading...
Need help?
General
