Electrical connection
8.3 System integration
1FN3 linear motors
488 Configuration Manual, 10/2018, 6SN1197-0AB86-0BP2
The following diagram shows an example of a motor integrated into a system with Temp-S
and Temp-F connected via TM120. An incremental encoder (sin/cos 1 V
PP
) or absolute
encoder (EnDat with 1 V
PP
, order designation EnDat01 or EnDat02, or SSI with 1 V
PP
) is
connected via SMC20.
Figure 8-4 System integration with TM120 and SMC20 (example)
The following diagram shows an example of a motor integrated into a system with Temp-S
and Temp-F connected via TM120. A DRIVE-CLiQ encoder is connected directly to the
TM120.
Figure 8-5 System integration with TM120 (example)
To Next Page
Loading...
