Siemens SINAMICS S120 - Page 121

Electrical installation
4.5 Connections
Cabinet Modules NEMA
Manual, 04/2014, A5E03586450A
121
Cable routing for customer terminal block –X55, frame sizes HX+HI and JX+JI
Frame size:
HX+HI
JX+JI
1.
Feed the cable for the customer terminal block into the cabinet from the bottom left.
2.
Use cable ties to secure the cable at suitable points.
3.
Feed the cable toward the top of the cabinet and, when it reaches the level of the
customer terminal block -X55, guide it to the left or right to -X55. When doing so, route
the cable in a similar manner to the standard cables that have already been installed in
the cabinet.
4.
Use cable ties to secure the cable at suitable points.
5.
Connect the cables to the customer terminal block -X55.