Siemens SINAMICS S120 - N52, DC Link Fuses for Basic Line Modules

Options
8.48 N52, DC link fuses for Basic Line Modules
Cabinet Modules NEMA
496 Manual, 04/2014, A5E03586450A
8.48
N52, DC link fuses for Basic Line Modules
Availability of option
This option is available for the following S120 Cabinet Modules:
● Basic Line Modules
Description
Fuses are installed on the DC side to protect the Basic Line Module.
Installation of DC fuses is recommended if the DC current load in the configured drive
assembly can be larger than the rated DC link current of the Basic Line Module.
The DC fuses also protect the Basic Line Module against an overvoltage on the DC busbar
of the drive assembly in the event of a malfunction.