Siemens SINAMICS S120 - G20, CBC10 Communication Board

Options
8.3 G20, CBC10 Communication Board
Cabinet Modules NEMA
350 Manual, 04/2014, A5E03586450A
8.3
G20, CBC10 Communication Board
Availability of option
This option is available for the following S120 Cabinet Modules:
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize Cabinet Kits
● Motor Modules in chassis format
Description
Figure 8-1 CAN CBC10 Communication Board
The CBC10 CANopen communication board (CAN Communication Board) is used to
connect drives in the SINAMICS drive system to higher-level automation systems with a
CAN bus.
The CANopen Option Board uses two 9-pin sub D connectors for the connection to the CAN
bus system.
The connectors can be used as inputs or outputs. Unused pins are plated through.
The following baud rates are also supported:
10, 20, 50, 125, 250, 500, 800 kBaud and 1 MBaud.
The module is installed in the factory in the option slot of the CU320-2 Control Unit.