Siemens SINAMICS S120 - M60, Additional Shock Protection; M70, EMC Shield Bus; General Information

Options
8.43 M60, additional shock protection
Cabinet Modules NEMA
Manual, 04/2014, A5E03586450A
491
8.43
M60, additional shock protection
Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Motor Modules in chassis format
Description
The standard Cabinet Modules are designed according to BGV A 3. With option M60,
additional covers (out of reach of accessible control and contact elements) are installed
upstream of the power unit.
Note
Do not operate without cabinet door(s)
The additional shock protection (option M60) is not a substitute for the cabinet door(s).
Cabinets must not be operated without
cabinet door(s).
8.44
M70, EMC shield bus
8.44.1
General information
Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
● Booksize base cabinets
● Motor Modules in chassis format
● Auxiliary Power Supply Modules