Siemens SINAMICS S120 - 8.30 L42;L43;L44, Line Connection Module for Active; B Asic;Smart Line Modules

Options
8.30 L42/L43/L44, Line Connection Module for Active/Basic/Smart Line Modules
Cabinet Modules NEMA
Manual, 04/2014, A5E03586450A
457
8.30
L42/L43/L44, Line Connection Module for Active/Basic/Smart Line
Modules
Availability of options
These options are available for the following S120 Cabinet Modules:
● Line Connection Modules
Option L42, Line Connection Module for Active Line Modules
This option means that the Line Connection Module is adjusted for connection to an Active
Line Module.
If a main contactor is required in the Line Connection Module for correct functioning, then
this contactor is included.
Option L43, Line Connection Module for Basic Line Modules
This option means that the Line Connection Module is adjusted for connection to a Basic
Line Module.
In this case, the Line Connection Modules are equipped with the line reactor for Basic Line
Modules. If the line reactor is not required, it can be deselected with option L22 (line reactor
not included in product package).
Option L44, Line Connection Module for Smart Line Modules
This option means that the Line Connection Module is adjusted for connection to a Smart
Line Module.
If a main contactor is required in the Line Connection Module for correct functioning, then
this contactor is included.