Siemens SINAMICS S120 - Slot for the Memory Card

Options
8.22 K95, CU320-2 PN Control Unit
Cabinet Modules NEMA
438 Manual, 04/2014, A5E03586450A
8.22.10.4
Slot for the memory card
Slot for the memory card
Figure 8-35 Slot for the memory card
Note
Insertion direction of the memory card
Only insert t
he memory card as shown in the figure above (arrow at top right).
Note
Possible data loss when returning the Control Unit with memory card
When a defective Control Unit is returned, the data on the memory card (parameters,
firmware, licenses, etc.) cou
ld be lost during repair and testing.
•
Do not return the memory card with the Control Unit, but keep it in a safe place so that it
can be inserted in the replacement unit.