Maintenance and servicing
6.4 Replacing components
Cabinet Modules NEMA
318 Manual, 04/2014, A5E03586450A
Installation is performed the same as removal, but in the reverse order.
Note
Pay attention to the tightening torques
The tightening torques specified in the "Tightening torques for screw connections" table must
be observed.
Replacing the cylindrical fuses
Preparatory steps
● Disconnect the cabinet from the power supply (do not forget the external power supplies).
1. Open the cabinet.
2. Open the fuse holder (push the flap down/up).
3. Remove the defective fuse.
4. Insert the replacement fuse.
5. Close the fuse holder (push the flap up/down).
6. Close the cabinet.
To Next Page
Loading...
