Siemens SINAMICS S120 - X55 Customer Terminal Strip; General Information

Cabinet Modules
5.6 Motor Modules in chassis format
Cabinet Modules NEMA
Manual, 04/2014, A5E03586450A
221
Table 5- 32 Motor Modules, 675 ...1035 V DC
Order no.
Frame size
P
n
[HP] ([kW])
I
rated rms
[A]
Minimum length [ft] ([m])
6SL3720-1TG28-5AU3
FX
75 (75)
85
330 (100)
6SL3720-1TG31-0AU3
FX
75 (90)
100
295 (90)
6SL3720-1TG31-2AU3
FX
100 (110)
120
262 (80)
6SL3720-1TG31-5AU3 FX 150 (132) 150 230 (70)
6SL3720-1TG31-8AU3
GX
150 (160)
175
197 (60)
6SL3720-1TG32-2AU3
GX
200 (200)
215
165 (50)
6SL3720-1TG32-6AU3
GX
250 (250)
260
131 (40)
6SL3720-1TG33-3AU3
GX
300 (315)
330
98 (30)
6SL3720-1TG34-1AU3
HX
400 (400)
410
82 (25)
6SL3720-1TG34-7AU3
HX
450 (450)
465
82 (25)
6SL3720-1TG35-8AU3
HX
600 (560)
575
66 (20)
6SL3720-1TG37-4AU3
JX
700 (710)
735
59 (18)
6SL3720-1TG38-1AU3
JX
800 (800)
810
49 (15)
6SL3720-1TG38-8AU3
JX
900 (900)
910
39 (12)
6SL3720-1TG41-0AU3
JX
1000 (1000)
1025
33 (10)
6SL3720-1TG41-3AU3
JX
1250 (1200)
1270
26 (8)
5.6.2
X55 customer terminal strip
5.6.2.1
General information
This section describes only those interfaces in the cabinet unit that require additional
connection work by the customer. All other interfaces are pre-wired at the factory and are not
designed for customer connections.
Note
Additional information
All connections to be established on the plant side as well as the interfaces for integration
into the plant control system are described in the circuit diagrams and terminal diagrams on
the customer DVD s
upplied with the device.