Siemens SINAMICS S120 - Page 165

Cabinet Modules
5.2 Basic Line Modules
Cabinet Modules NEMA
Manual, 04/2014, A5E03586450A
165
Order no.
6SL3730-
1TG33-
0AU3
1TG34-
3AU3
1TG36-
8AU3
1TG41-
1AU3
1TG41-
4AU3
1TG41-
8AU3
Frame size
FB
FB
FB
GB
GB
GD
SCCR (short circuit current rating)
kA IC
65
65
65
84
100
100
Minimum short-circuit current
6)
- with parallel connection
A 3000 4400 8000 2000
4000
2500
5000
3200
6400
1)
The base load current I
H DC
is based on a duty cycle of 150 % for 60 s or I
max DC
for 5 s with a duty cycle duration of
300 s.
2)
The current demand for the 500/690 V AC auxiliary supply is provided by the supply input voltage.
3)
The specified power loss represents the maximum value at 100 % capacity utilization. The value in normal operation is
lower.
4)
Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request.
5)
The cabinet height increases by 10" (250 mm) with degree of protection IP21, and by 16" (400 mm) with degrees of
protection IP23 (NEMA1 filtered), IP43, and IP54 (NEMA12 ventilated).
6)
Minimum current required for reliable tripping of the contained protective devices.