Maintenance and servicing
6.4 Replacing components
Cabinet Modules NEMA
272 Manual, 04/2014, A5E03586450A
Installation is performed the same as removal, but in the reverse order.
Note
Specifications for the installation
The tightening torques specified in the "Tightening torques for screw connections" table must
be observed.
Carefully insert the plug
-in connections and ensure that they are secure.
e connectors must be re-installed at their original slot. The fiber optic
cables and sockets are labeled accordingly (U11, U21, U31) for correct assignment.
To Next Page
Loading...
