Detailed Description
2.2 Dimensional information for transverse axes
Transverse Axes (P1)
2-4 Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Permanently radius-related data
For transverse axes, the following data is always entered, programmed and displayed in
relation to radius:
• Offsets:
– Tool offsets
– Programmable and configurable frames
– External work offset
– DRF and preset offset
– etc.
• Working area limitation
• Software limit switch
• Feed
• Display data with reference to the machine coordinate system
• Display data of the service images for axis, FSD and MSD
To Next Page
Loading...
