Siemens SIREMOBIL Iso-C 3D User Manual

SIREMOBIL Iso-C 3D SPR2-230.814.01 Page 4 of 42 Siemens AG
Rev. 05 08.04 CS PS 24 Medical Solutions
6 - 4 3. Part of activities independent of serial number
Cable no. 13, item number n.a. 6
is included in system cabling 71 39 855
• Pull the video cable of the replaced monitor (item number 31 00 232) through to the left
and down.
• Attach the base plate for the new monitor to the monitor trolley using 4 Allen screws
M 6 x 20 as well as contact washers (Fig. 9).
• Attach the 2 neck screws (see Ê /Fig. 11). They have to point toward the back of the
monitor trolley.
• Pull cable no. 13 (Fig. 8) through the monitor support. Pull cable downward and to the left
(see Fig. 10).
Fig. 8 Cable no.13 Fig. 9 New base plate for monitor
Fig. 10 Monitor trolley, opening to the left in the back Fig. 11 New monitor support including cables

Siemens SIREMOBIL Iso-C 3D Specifications

General

Brand	Siemens
Model	SIREMOBIL Iso-C 3D
Category	Medical Equipment
Language	English