Siemens SIREMOBIL Iso-C 3D - Cables No. 8 and 9, Item Number N.a

SIREMOBIL Iso-C 3D SPR2-230.814.01 Page 36 of 42 Siemens AG
Rev. 05 08.04 CS PS 24 Medical Solutions
6 - 36 3. Part of activities independent of serial number
Cables no. 8 and 9, item number n.a. 6
are included in system cabling 71 39 855
• Connect plug 3D-PC CAN of cable no. 9 (siehe Fig. 83) to the "CAN port" of the PC and
secure it with screws.
• Connect plug X100 of cable no. 9 (siehe Fig. 83) with plug X100 of cable no. 8
(siehe Fig. 84) and secure it with screws.
• The "Navigation" plug is currently not in use. The connection for this plug is described
separately in the document "Navigation start-up".
Fig. 84 Cable no. 9 Fig. 85 Cable no. 8
Markierung für Tastaturschublade