Siemens SIRIUS 3RK3 - Removing the Central Unit, Expansion Module, or DP Interface Module from a DIN Rail

Procedure
Step Instructions Figure
1 Hold the device 󹪝rmly.
2 Unscrew the cap screws.
3 Lift the device from the level surface.
4 Remove the push-in lugs for screw 󹪝xing
from the device.
5.2.8 Removing the central unit, expansion module, or DP interface module from a
DIN rail
WARNING
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Requirements
• The interface connections are disconnected.
• The terminal blocks have been removed or disconnected.
Description of the hardware
5.2 Mounting / installing / attaching
SIRIUS 3RK3 Modular Safety System
130 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006