5.3.4.11 Disassembly of the PROFINET connector
Step Instructions Figure
1 Insert a screwdriver blade (2.5 mm) into the un‐
locking opening of the PROFINET connector.
2 Unlock the connector by pressing the handle of
the screwdriver to the left.
3 Press and hold the handle of the screwdriver to
the left and pull the PROFINET connector o.
Description of the hardware
5.3 Connecting / wiring
SIRIUS 3RK3 Modular Safety System
170 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006
To Next Page
Loading...
