Procedure
Step Instructions Figure
1 Insert the at-head screwdriver into the rectan‐
gular opening of the spring-loaded terminal un‐
til it engages.
2 Remove the cable from the oval opening.
3 Remove the screwdriver.
5.3.4.8 Attaching the terminals
WARNING
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Requirements
• You must have removed the terminal blocks, for the purpose of replacing a device, for
example.
Description of the hardware
5.3 Connecting / wiring
SIRIUS 3RK3 Modular Safety System
166 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006
To Next Page
Loading...
