Siemens SIRIUS 3RK3 - Diagnostics with Diagnostics Display; Diagnostics Display

7.7 Diagnostics with diagnostics display
7.7.1 Diagnostics display
6,5,866.
'(9,&(
%)
6)
Figure 7-9 Diagnostics display
A diagnostics display is available for the safety relays that is able to display the current messages,
diagnostics data, and status information of the monitored system. It has three status LEDs and
makes the device interface easily accessible outside of the control cabinet.
Note
3SK2 safety relays
3SK2 safety relays are only supported by the 3SK26 diagnostics display.
MSS 3RK3 Advanced/ MSS 3RK3 ASIsafe basic/ MSS 3RK3 ASIsafe extended
These 3RK3 central units are supported by the 3RK36 diagnostics display as from product version
E03 and 󹪝rmware version
1)
V1.1.x and higher, and/or by the 3SK26 diagnostics display.
MSS 3RK3 Basic
MSS 3RK3 Basic is only supported by the 3RK36 diagnostics display as from product version E01
and higher and/or the 3SK26 diagnostics display.
1)
The 󹪝rmware version can be read at the startup of the display or at the bottom left when the
display is disabled. It can also be shown by selecting the menu command "Display settings /
Identi󹪝cation" (see also Section "Display settings (Page 344)").
Diagnostics display
3SK26 3RK36 3RK36
V1.0 / E01 V1.1 / E03 V1.0 / as from E01
3SK2 Yes No No
Diagnostics / service
7.7 Diagnostics with diagnostics display
SIRIUS 3RK3 Modular Safety System
328 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006