Siemens SIRIUS 3RK3 - Menus

7.7.4 Menus
You can navigate the menu with the arrow keys and softkeys. Any menu option may have
additional sub-menus. The menu structure and display are in part directly dependant on the
device parameterization (e. g. selected control function) and hardware con󹪝guration (e.g. type
and number of expansion modules used).






2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
%HWULHEV]XVWDQG
3URMHNWLHUXQJ
0HOGXQJHQ
6WDWXV
6\VWHP
NRQILJXUDWLRQ
'LVSOD\
HLQVWHOOXQJHQ
EHU6,(0(16
6DIHW\
8QWHUPHQ¾
8QWHUPHQ¾
8QWHUPHQ¾
8QWHUPHQ¾
8QWHUPHQ¾
Pressing of the softkeys
Pressing of the arrow keys
Figure 7-11 First level of the menu of the diagnostics display
Status display ①
The "status display" is the standard display of the diagnostics display. It displays the equipment
identi󹪝er, the operating status and the status of the con󹪝guration.
You can navigate to the individual menus via the right softkey (OK). With the left softkey (reset),
pending errors can be acknowledged directly.
If messages are pending, they are displayed directly, that is, the diagnostics menu switches
directly to the message menu and to the message with the highest priority. This function can be
deactivated via the display settings. If multiple messages are pending, they are displayed as a list
that is visible on the scrollbar on the right side of the display. You can scroll to the individual
messages with the arrow keys.
Diagnostics / service
7.7 Diagnostics with diagnostics display
SIRIUS 3RK3 Modular Safety System
332 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006