Siemens SIRIUS 3RK3 - Disassembling the PROFINET Interface from a Level Surface; Disassembling Devices from a Standard Mounting Rail

5.2.10 Disassembling the PROFINET interface from a level surface
WARNING
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Requirements
• The terminals have been removed or disconnected.
• The interface connections are disconnected.
Procedure
Step Instructions Figure
1 Hold the device 󹪝rmly.
2 Unscrew the cap screws.
3 Lift the device from the level
surface.
4 Remove the push-in lugs for
screw 󹪝xing from the device.
5.2.11 Disassembling devices from a standard mounting rail
WARNING
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Description of the hardware
5.2 Mounting / installing / attaching
SIRIUS 3RK3 Modular Safety System
132 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006