Siemens SIRIUS 3RK3 - Operator Controls and Displays on the Diagnostics Display

Display on the diagnostic display
Display ①
Messages and status information of the safety relay can be displayed in plain text here. Short
values (e.g.: plant identi󹪝ers) are displayed directly under the heading, long texts (e.g. the
comment) are shown in a submenu. It can be seen on the (OK) key that a submenu can be
launched.
Scrollbar ②
As shown in the graphic, this bar shows whether there are any more menu items or messages.
These items can be selected and displayed using the arrow keys.
If no other entries are present, the inside of the bar is black.
Function of the softkeys ③
Displays the current function of the two softkeys.
Possible displays:
Key left (meaning) Key right (meaning)
⇑ (moves you one menu level higher) OK (selects / con󹪝rms)
Reset (acknowledges error)
7.7.3 Operator controls and displays on the diagnostics display
SIRIUS 3SK2
DEVICE
BF
SF



Figure 7-10 Display and operating elements on the diagnostics display
Two arrow keys ①
They serve to navigate the menu or change the display settings, e.g. to change the contrast
setting or to scroll through displayed content.
Diagnostics / service
7.7 Diagnostics with diagnostics display
SIRIUS 3RK3 Modular Safety System
330 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006